**********************************************************************************
***                                                                            ***
***                    Readme.txt  for TrMonitor.exe                           ***
***                                                                            ***
**********************************************************************************

Outline     
        TrMonitor is the application developed because sight turned for 
        "Monitoring Data" which is the output file of "TRYCUT" 
        which is the trial cutting support tool to verify NC data.

Function 
        A side shaft is taken in the "cutting movement distance", and 
        the "amount of cutting removal of around the unit movement", "amount of 
        cutting removal of the unit time(sec) conversion" which the original 
        cutting speed was used for or "amount of cutting removal of the unit time(sec)
        conversion which an optimization cutting speed was used for is indicated
        in the vertical axis.

Operation   
    Menu  File  Open   
    FILE OPEN button     
        A file choice dirlog starts. Choose a Monitoring Data file.
        Reading is done respectively by the text format, the binary format 
        at the time of ".txt", ".bin" in the expansion. Choose it in accordance 
        with this because the message of the format designation is indicated 
        at the time of the one except for it.

    Menu  File  Exit
        Application is finished. A variety parameter in the completion is initialized
        with the next same environment when it starts because it is kept.

    Menu  Config  Indication Function  Cutting Removal
        The item being checked becomes effective.
        The "amount of cutting removal of around the unit movement" is indicated 
        in the vertical axis. A mark is decided automatically based on the maximum value
        of the amount of cutting removal.

    Menu  Config  Indication Function    Removal with OrgFeed
        The item being checked becomes effective.
        It is indicated the "amount of cutting removal of the unit time(sec) conversion" 
        which the cutting speed of the original data was used for in the vertical axis.
        A rapid feed speed is applicable to the location. A mark means that it was cut 
        by the rapid feed when it can be shaken off because it has maximum value 
        in cutting decided as the cause automatically.

    Menu  Config  Indication Function    Removal with OptFeed
        The item being checked becomes effective.
        It is indicated the "amount of cutting removal of the unit time(sec) conversion" 
        which  an optimization cutting speed was used for in the vertical axis.
        A rapid feed speed is applicable to the location. A mark means that it was cut 
        by the rapid feed when it can be shaken off because it has maximum value 
        in cutting decided as the cause automatically.

    Menu  Config  Treatment of Distance  Containe of G00 Movement
        The item being checked becomes effective.
        The amount of movement to locate it in the "cutting movement distance" of 
        the horizontal axis is contained.

    Menu  Config  Treatment of Distance   Ignore of G00 Movement
        The item being checked becomes effective.
        The amount of movement to locate it in the "cutting movement distance" of 
        the horizontal axis isn't contained.

    Menu    Config    Drawing Color
        A dirlog for the drawing color establishment starts.
        It is classified in accordance with the color indicated here for
        every tool exchange. The number chosen at present turns over, 
        and the number chosen at present is indicated, and a color change is possible.
      Change button
        The establishment dirlog of the color starts. The establishment of the color 
        of the number chosen at present is changed.
      OK button
        The color being indicated at present is kept as a new establishment, 
        and a dirlog is closed.
      Cancellation button
        This change should be made ineffective, and a dirlog is closed.

    Menu    Config    G00 Feed
        A location rapid feed speed is inputted.
        This value is used for the location in the unit time conversion.

    VIEW screen     
        A horizontal axis can expand by a drug's doing the inside of the screen.
        At this time, Scroll bar under the screen shows a position in the whole.
        And, Scroll in the horizontal axis direction is possible by operating this.
        It clicks double inside the screen to indicate the whole.

TrMonitor.ini
        It is the initialization file of "TrMonitor.exe". When this file isn't found, 
        a default file is made in the installation holder. The establishment of 
        the textbook inside TrMonitor is contained in this file. Edit the item of Text 
        in the file when you change it to the revelation word and so on.